Skip to content

Deploying and Configuring Multi-tenant Node

The multi-tenant node protects several independent company infrastructures or isolated environments simultaneously.

Multi-tenant node deployment options

Choose the multi-tenant node deployment option based on your infrastructure and the addressed issue:

  • Deploy one Wallarm node to filter traffic of all clients or isolated environments as follows:

    Partner node scheme

    • One Wallarm node processes the traffic of several tenants (Tenant 1, Tenant 2).

      The term "partner client"

      Previously, "tenant" was referred to as "partner client". We further use the term "tenant".

    • The Wallarm node identifies the tenant that receives the traffic by the unique identifier of a tenant (wallarm_partner_client_uuid or partner_client_uuid in Envoy installation).

    • For the domains https://tenant1.com and https://tenant2.com, the DNS A records with the partner or client IP address 225.130.128.241 are configured. This setting is shown as an example, a different setting can be used on the partner and tenant side.
    • On the partner's side, proxying of legitimate requests to the addresses of tenant Tenant 1 (http://upstream1:8080) and Tenant 2 (http://upstream2:8080) is configured. This setting is shown as an example, a different setting can be used on the partner and tenant side.

    If the Wallarm node is of the CDN type

    Since the wallarm_application configuration is not supported by the Wallarm CDN node, this deployment option is not supported by the CDN node type too. If the node type being used is CDN, please deploy several nodes each filtering the traffic of a particular tenant.

  • Deploy several Wallarm nodes each filtering the traffic of a particular tenant as follows:

    Client several nodes scheme

    • Several Wallarm nodes each filtering the traffic of a particular tenant (Tenant 1, Tenant 2).
    • For the domain https://tenant1.com, the DNS record with the client IP address 225.130.128.241 is configured.
    • For the domain https://tenant2.com, the DNS record with the client IP address 225.130.128.242 is configured.
    • Each node is proxying the legitimate requests to the addresses of its tenant:

Multi-tenant node characteristics

Multi-tenant node:

  • Can be installed on the same platforms and according to the same instructions as a regular filtering node.

  • Can be installed on the technical tenant or tenant level. If you want to provide a tenant with access to Wallarm Console, the filtering node must be installed at the corresponding tenant level.

  • Can be configured according to the same instructions as a regular filtering node.

  • The directive wallarm_partner_client_uuid is used to split traffic by the tenants.

  • The directive wallarm_application is used to split settings by the applications.

Deployment requirements

Recommendations for a multi-tenant node deployment

  • If it is required for the tenant to access Wallarm Console, create the filtering node within an appropriate tenant account.

  • Configure the filtering node via the tenant's NGINX configuration file.

Procedure for a multi-tenant node deployment

  1. In Wallarm Console → Nodes, click Create node and select Wallarm node.

    Switching an existing Wallarm node to the multi-tenant mode

    If you want to switch an existing Wallarm node to the multi-tenant mode, use the Make it multi-tenant option from the required node menu in the Nodes section.

    Once switched and confirmed, proceed to the 4th step.

  2. Select the Multi-tenant node option.

    Multi-tenant node creation

  3. Set node name and click Create.

  4. Copy the filtering node token.

  5. Depending on a filtering node deployment form, perform steps from the appropriate instructions.

  6. Split traffic between tenants using their unique identifiers.

    Open the tenant's NGINX configuration file and split traffic between tenants using the wallarm_partner_client_uuid directive. See example below.

    Use Ingress annotation nginx.ingress.kubernetes.io/wallarm-partner-client-uuid to set tenant UUID for each Ingress resource. One resource is related to one tenant:

    kubectl annotate --overwrite ingress <YOUR_INGRESS_NAME> -n <YOUR_INGRESS_NAMESPACE> nginx.ingress.kubernetes.io/wallarm-partner-client-uuid=VALUE
    1. Open the NGINX configuration file and split traffic between tenants using the wallarm_partner_client_uuid directive. See example below.
    2. Run the docker container mounting the configuration file.
    1. Open the envoy.yaml configuration file and split traffic between tenants using the partner_client_uuid parameter.
    2. Run the docker container mounting prepared envoy.yaml.
    1. Open the NGINX configuration file and split traffic between tenants using the wallarm_partner_client_uuid directive.
    2. Mount an NGINX configuration file to the Wallarm sidecar container.

    Example of the NGINX configuration file for the filtering node processing the traffic of two clients:

    server {
    listen       80;
    server_name  tenant1.com;
    wallarm_mode block;
    wallarm_partner_client_uuid 11111111-1111-1111-1111-111111111111;

    location / {
        proxy_pass      http://upstream1:8080;
    }
}

server {
    listen       80;
    server_name  tenant2.com;
    wallarm_mode monitoring;
    wallarm_partner_client_uuid 22222222-2222-2222-2222-222222222222;

    location / {
        proxy_pass      http://upstream2:8080;
    }
}
    • On the tenant side, the DNS A records with the partner IP address are configured
    • On the partner side, proxying of requests to the addresses of tenants (http://upstream1:8080 for the tenant with wallarm_partner_client_uuid 11111111-1111-1111-1111-111111111111 and http://upstream2:8080 for the tenant with wallarm_partner_client_uuid 22222222-2222-2222-2222-222222222222) is configured
    • All incoming requests are processed on the partner address, legitimate requests are proxied to http://upstream1:8080 for the tenant with wallarm_partner_client_uuid 11111111-1111-1111-1111-111111111111 and to http://upstream2:8080 for the tenant with wallarm_partner_client_uuid 22222222-2222-2222-2222-222222222222

  7. If necessary, specify IDs of tenant's applications using the wallarm_application directive.

    Example:

    server {
    listen       80;
    server_name  tenant1.com;
    wallarm_mode block;
    wallarm_partner_client_uuid 11111111-1111-1111-1111-111111111111;

    location / {
        proxy_pass      http://upstream1:8080;
    }

    location /login {
        wallarm_application 21;
        ...
    }
    location /users {
        wallarm_application 22;
        ...
    }
}

    Two applications belong to the tenant 11111111-1111-1111-1111-111111111111:

    • tenant1.com/login is the application 21
    • tenant1.com/users is the application 22

Configuring a multi-tenant node

To customize the filtering node settings, use the available directives.

Common customization options: