Wallarm-Specific Values of the Sidecar Helm Chart¶

This document describes Wallarm-specific Helm chart values you can change during Wallarm Sidecar deployment or upgrade. The Wallarm-specific and other chart values are for global configuration of the Sidecar Helm chart.

Priorities of global and per-pod's settings

Per-pod's annotations take precedence over Helm chart values.

The Wallarm-specific part of the default values.yaml that you might need to change looks like the following:

config:
  wallarm:
    api:
      token: ""
      host: api.wallarm.com
      port: 443
      useSSL: true
      caVerify: true
      nodeGroup: "defaultSidecarGroup"
      existingSecret:
        enabled: false
        secretKey: token
        secretName: wallarm-api-token
    fallback: "on"
    mode: monitoring
    modeAllowOverride: "on"
    enableLibDetection: "on"
    parseResponse: "on"
    aclExportEnable: "on"
    parseWebsocket: "off"
    unpackResponse: "on"
    ...
  nginx:
    workerProcesses: auto
    workerConnections: 4096
postanalytics:
  external:
    enabled: false
    host: ""
    port: 3313
  ...
# Optional part for custom admission webhook certificate provisioning
# controller:
#  admissionWebhook:
#    certManager:
#      enabled: false
#    secret:
#      enabled: false
#      ca: <base64-encoded-CA-certificate>
#      crt: <base64-encoded-certificate>
#      key: <base64-encoded-private-key>

config.wallarm.api.token¶

A filtering node token value. It is required to access the Wallarm API.

The token can be one of these types:

API token (recommended) - Ideal if you need to dynamically add/remove node groups for UI organization or if you want to control token lifecycle for added security. To generate an API token:

To generate an API token:
1. Go to Wallarm Console → Settings → API tokens in either the US Cloud or EU Cloud.
2. Create an API token with the Deploy source role.
3. During node deployment, use the generated token and specify the group name using the config.wallarm.api.nodeGroup parameter. You can add multiple nodes to one group using different API tokens.
Node token - Suitable when you already know the node groups that will be used.

To generate a node token:
1. Go to Wallarm Console → Nodes in either the US Cloud or EU Cloud.
2. Create a node and name the node group.
3. During node deployment, use the group's token for each node you want to include in that group.

The parameter is ignored if config.wallarm.api.existingSecret.enabled: true.

config.wallarm.api.host¶

Wallarm API endpoint. Can be:

us1.api.wallarm.com for the US cloud
api.wallarm.com for the EU cloud (default)

config.wallarm.api.nodeGroup¶

This specifies the name of the group of filtering nodes you want to add newly deployed nodes to. Node grouping this way is available only when you create and connect nodes to the Cloud using an API token with the Deploy role (its value is passed in the config.wallarm.api.token parameter).

Default value: defaultSidecarGroup

Pod's annotation: sidecar.wallarm.io/wallarm-node-group.

config.wallarm.api.existingSecret¶

Starting from the Helm chart version 4.4.4, you can use this configuration block to pull a Wallarm node token value from Kubernetes secrets. It is useful for environments with separate secret management (e.g. you use an external secrets operator).

To store the node token in K8s secrets and pull it to the Helm chart:

Create a Kubernetes secret with the Wallarm node token:
```
kubectl -n wallarm-sidecar create secret generic wallarm-api-token --from-literal=token=<WALLARM_NODE_TOKEN>
```
- If you followed the deployment instructions without modifications, wallarm-sidecar is the Kubernetes namespace created for the Helm release with the Wallarm Sidecar controller. Replace the name if using a different namespace.
- wallarm-api-token is the Kubernetes secret name.
- <WALLARM_NODE_TOKEN> is the Wallarm node token value copied from the Wallarm Console UI.
If using some external secret operator, follow appropriate documentation to create a secret.

Set the following configuration in values.yaml:

config:
  wallarm:
    api:
      token: ""
      existingSecret:
        enabled: true
        secretKey: token
        secretName: wallarm-api-token

Default value: existingSecret.enabled: false that points the Helm chart to get the Wallarm node token from config.wallarm.api.token.

config.wallarm.fallback¶

With the value set to on (default), NGINX services have the ability to enter an emergency mode. If proton.db or custom ruleset cannot be downloaded from the Wallarm Cloud due to its unavailability, this setting disables the Wallarm module and keeps NGINX functioning.

Pod's annotation: sidecar.wallarm.io/wallarm-fallback.

config.wallarm.mode¶

Global traffic filtration mode. Possible values:

monitoring (default)
safe_blocking
block
off

Pod's annotation: sidecar.wallarm.io/wallarm-mode.

config.wallarm.modeAllowOverride¶

Manages the ability to override the wallarm_mode values via settings in the Cloud. Possible values:

on (default)
off
strict

Pod's annotation: sidecar.wallarm.io/wallarm-mode-allow-override.

config.wallarm.enableLibDetection¶

Whether to additionally validate the SQL Injection attacks using the libdetection library. Possible values:

on (default)
off

Pod's annotation: sidecar.wallarm.io/wallarm-enable-libdetection.

config.wallarm.parseResponse¶

Whether to analyze the application responses for attacks. Possible values:

on (default)
off

Response analysis is required for vulnerability detection during passive detection and active threat verification.

Pod's annotation: sidecar.wallarm.io/wallarm-parse-response.

config.wallarm.aclExportEnable¶

Enables on / disables off sending statistics about the requests from the denylisted IPs from node to the Cloud.

With config.wallarm.aclExportEnable: "on" (default) the statistics on the requests from the denylisted IPs will be displayed in the Attacks section.
With config.wallarm.aclExportEnable: "off" the statistics on the requests from the denylisted IPs will not be displayed.

Pod's annotation: sidecar.wallarm.io/wallarm-acl-export-enable.

config.wallarm.parseWebsocket¶

Wallarm has full WebSockets support. By default, the WebSockets' messages are not analyzed for attacks. To force the feature, activate the API Security subscription plan and use this setting.

Possible values:

on
off (default)

Pod's annotation: sidecar.wallarm.io/wallarm-parse-websocket.

config.wallarm.unpackResponse¶

Whether to decompress compressed data returned in the application response:

on (default)
off

Pod's annotation: sidecar.wallarm.io/wallarm-unpack-response.

config.nginx.workerConnections¶

The maximum number of simultaneous connections that can be opened by an NGINX worker process.

Default value: 4096.

Pod's annotation: sidecar.wallarm.io/nginx-worker-connections.

config.nginx.workerProcesses¶

NGINX worker process number.

Default value: auto, which means the number of workers is set to the number of CPU cores.

Pod's annotation: sidecar.wallarm.io/nginx-worker-processes.

postanalytics.external.enabled¶

Determines whether to use the Wallarm postanalytics (Tarantool) module installed on an external host or the one installed during the Sidecar solution deployment.

This feature is supported starting from Helm release 4.6.4.

Possible values:

false (default): use the postanalytics module deployed by the Sidecar solution.
true: If enabled, please provide the external address of the postanalytics module in the postanalytics.external.host and postanalytics.external.port values.

If set to true, the Sidecar solution does not run the postanalytics module, but expects to reach it at the specified postanalytics.external.host and postanalytics.external.port.

postanalytics.external.host¶

The domain or IP address of the separately installed postanalytics module. This field is required if postanalytics.external.enabled is set to true.

This feature is supported starting from Helm release 4.6.4.

Example values: tarantool.domain.external or 10.10.0.100.

The specified host must be accessible from the Kubernetes cluster where the Sidecar Helm chart is deployed.

postanalytics.external.port¶

The TCP port on which the Wallarm postanalytics module is running. By default, it uses port 3313 as the Sidecar solution deploys the module on this port.

If postanalytics.external.enabled is set to true, specify the port on which the module is running on the specified external host.

controller.admissionWebhook.certManager.enabled¶

Whether to use cert-manager for generating the admission webhook certificate instead of the default certgen. Supported starting with release 4.10.7

Default value: false.

controller.admissionWebhook.secret.enabled¶

Whether to manually upload certificates for the admission webhook instead of using the default certgen. Supported starting with release 4.10.7.

Default value: false.

If set to true, specify the base64-encoded CA certificate, server certificate, and private key, e.g.:

controller:
  admissionWebhook:
    secret:
      enabled: true
      ca: <base64-encoded-CA-certificate>
      crt: <base64-encoded-certificate>
      key: <base64-encoded-private-key>