Exporting Metrics to Zabbix via the
Example of metric
This example shows how to work with the single
curl_json-wallarm_nginx/gauge-abnormal metric, which shows the number of requests processed by the filter node.
The following deployment scheme is used in this document:
The Wallarm filter node is deployed on a host accessible via the
10.0.30.5IP address and the
node.example.localfully qualified domain name.
The host has the Zabbix agent 4.0 LTS deployed that
- Downloads the filter node metrics using the
- Listens to incoming connections on the
10050/TCPport (thus passive checks will take place with the use of Zabbix Appliance).
- Passes metric values to Zabbix Appliance.
- Downloads the filter node metrics using the
On a dedicated host with the
10.0.30.30IP address (hereinafter referred to as the Docker host), the Zabbix Appliance 4.0 LTS is deployed in the form of a Docker container.
The Zabbix Appliance includes
- A Zabbix server that periodically polls the Zabbix agent installed on the filter node host to get information about changes to any monitored metrics).
- The Zabbix server management web interface, available on the
Configuring Metrics Export to Zabbix¶
It is assumed that
collectdservice has been configured for working via a Unix domain socket (see here for details).
- Docker Community Edition is already installed on the
node.example.localfilter node is already deployed, configured, available for further configuration (for example, via the SSH protocol), and working.
To deploy the Zabbix Appliance 4.0 LTS, execute the following command on the Docker host:
docker run --name zabbix-appliance -p 80:80 -d zabbix/zabbix-appliance:alpine-4.0-latest
Now you have a working Zabbix monitoring system.
Deploying the Zabbix Agent¶
Install the Zabbix Agent 4.0 LTS on a host with the filter node:
Connect to the filter node (for example, using the SSH protocol). Make sure you are running as
rootor another account with superuser privileges.
Connect the Zabbix repositories (use the “Install Zabbix repository” entry of the instructions for your operating system).
Install the Zabbix agent by executing the appropriate command:
sudo apt install zabbix-agent
sudo yum install zabbix-agent
Configure the Zabbix Agent to work with the Zabbix Appliance. To do this, make the following changes to the
Server=10.0.30.30 # Zabbix IP address Hostname=node.example.local # FQDN of the host with the filter node
Configuring Metrics Collection Using the Zabbix Agent¶
Connect to the filter node (for example, using the SSH protocol) and configure the collection of metrics using the Zabbix agent. To do this, perform the following steps on the host with the filter node:
1. Install the
Execute the appropriate command:
sudo apt install --no-install-recommends collectd-utils
sudo yum install collectd-utils
2. Configure the
collectd-nagios utility to run with elevated privileges on behalf of the
visudo utility to add the following line to the
zabbix ALL=(ALL:ALL) NOPASSWD:/usr/bin/collectd-nagios
This allows the
zabbix user to run the
collectd-nagios utility with superuser privileges using the
sudo utility without the need to provide a password.
collectd-nagios with superuser privileges
The utility must be run with superuser privileges because it uses the
collectd Unix domain socket to receive data. Only a superuser can access this socket.
As an alternative to adding the
zabbix user to the
sudoers list, you can configure the Zabbix agent to run as
root (this may pose a security risk, so this is not recommended). This can be achieved by enabling the
AllowRoot option in the agent configuration file.
3. Make sure that the
zabbix user can receive metric values from
Run the following test command on the filter node:
sudo -u zabbix sudo /usr/bin/collectd-nagios -s /var/run/collectd-unixsock -n curl_json-wallarm_nginx/gauge-attacks -H node.example.local
This command invokes the
zabbix user to get the value of the
curl_json-wallarm_nginx/gauge-attacks metric for the
node.example.local host with the filter node.
Example of the command output:
OKAY: 0 critical, 0 warning, 1 okay | value=0.000000;;;;
4. Add custom parameters to the Zabbix agent configuration file on the filter node host to get the metrics you need¶
For example, to create a custom parameter
wallarm_nginx-gauge-attacks that corresponds to the
curl_json-wallarm_nginx/gauge-attacks metric for a filter node with the fully qualified domain name
node.example.local, add the following line to the configuration file:
UserParameter=wallarm_nginx-gauge-attacks, sudo /usr/bin/collectd-nagios -s /var/run/collectd-unixsock -n curl_json-wallarm_nginx/gauge-attacks -H node.example.local | sed -n "s/.*value\=\(.*\);;;;.*/\1/p"
Extracting a metric value
To extract the value of a metric that goes after
value= in the output of the
collectd-nagios utility (e.g.,
OKAY: 0 critical, 0 warning, 1 okay | value=0.000000;;;;), this output is piped to the
sed utility that executes the
sed script to strip off unnecessary characters.
sed documentation for more information on the syntax of its scripts.
5. After all the necessary commands have been added to the Zabbix agent configuration file, restart the agent¶
sudo service zabbix-agent restart
sudo systemctl restart zabbix-agent
Now you can monitor user parameters related to Wallarm-specific metrics with Zabbix.